– Is your legacy PLOTBASE|3 installation starting to slow down?
– Is the PC hosting the PLOTBASE controller card in need of a refresh or replacement?
– Would you like to upgrade your PC at the same time you upgrade to the latest PLOTBASE|3 software version?
– Is there a fully supported PC / PLOTBASE with Controller card solution?
– Is it possible to assure PC hardware compatibility with a legacy PLOTBASE controller card?
A RATIO supplied, modestly priced re-certified PC is the answer to all of the above. We’ll install the correct PLOTBASE version of your choice along with an updated rsp license file and make sure the operating system is properly configured. It can save many hours of chargeable on-site installation time and avoid incompatibilities of the legacy controller cards with chip sets on new PCs. Many of the original legacy PLOTBASE controller cards will have issues if attempting to install on a new PC. Please check with us if you’re not sure of the PC compatibility of your controller before ordering a new computer.
-
Dell Mini-Tower re-certified PC W10-PRO or W7-PRO Operating System with PLOTBASE & SCANTOOL pre-installed
RATIO guarantees compatibility with legacy Ricoh RW-470, 240, 480, 2400/3600 controller cards
Specifications
Typical Specifications – Actual units available may vary from the specifications below. Please check with us for current model / spec availability
Model Select Dell series Single & Dual Core CPU Tower Processor Dual core 2.7ghz or higher RAM 3 or 4gb models Hard drive 160gb + optional 2nd 160gb hdd pre-installed for quick swap to restore original PLOTBASE install condition (250gb, 320gb, 500gb + 1.0tb also available) Video / card slots
external vga connection for on-board vga video + full height PCI slot + 1 PCI Express x16 + additional PCI slots for expansion video cards Optical Drive CDRxRW / DVDRxRW Operating System W7-PROx32 or W10-PROx32 OS upgraded, clean install / bloatware free. SNMP, Loop back adapter, lock pages activated as required by PLOTBASE specifications.* PLOTBASE Compatibility PLOTBASE|3 pre-installed with 3.7.4* (Windows 7) or 3.9** (Windows 10) upgrade version purchased separately.
All Ricoh models RW-470, RW-240, RW-480, RW-3600 / 2400 + equivalent Lanier, Savier, Gestetner, GEI +other PLOTBASE|3 supported modelsStorage 160 GB or higher available. SSD drive optional for fastest performance Includes Keyboard, Mouse, Power Cord Network Interface 10/100/1000 NIC Controller Card Compatibility All RATIO D1 ~ D4 controller cards (RW-470, 240, 480, 2400/3600 model controller cards. Also, most other legacy RATIO controller cards optional 2nd quick restore hdd pre-installed PLOTBASE, Monitor Warranty 180 Day swap out warranty by RATIO US. Reduced cost replacement after 180 days if it ever fails Interfaces USB ports, 10/100 ethernet, video, keyboard, mouse, sound ports. * Windows 7 Pro x32 OS requires PLOTBASE 3.7.4 upgrade purchase. XP-PRO OS is also available if desired.
** Windows 10 PRO x32 OS requires PLOTBASE 3.9 upgrade purchase
Please note that there will likely be surface blemishes / scratches on these previously owned PCs, however operational performance and structure are assured. All PCs are carefully checked, prepared and bench tested for a minimum of 24 hours.
Support for Re-furbished Dell PCs
RATIO fully supports our re-certified PCs and eliminates the ‘who’se responsible’ question if a PLOTBASE / controller compatibility or PC related issue comes up.
– 180 day no cost swap for equivalent re-certified model if any PC hardware issue is experienced*
– Low cost / fast turnaround swap after 180 days if an unrepairable PC hardware issue occurs
– Future PLOTBASE upgrades can easily be done at low cost by a hard drive pre-installed upgrade swap– Controller card is also warranted if a swap controller card is optionally ordered for a full plug & play solution
* No charge swap does not include shipping charges or cover environment caused damage such as power surge or physical damage of the PC or the controller card itself.
Item #’s
– Re-certified Dell PC with PLOTBASE preinstalled – # RFBPC-RW470
– Re-certified Dell PC with PLOTBASE preinstalled – # RFBPC-RW240
– Re-certified Dell PC with PLOTBASE preinstalled – # RFBPC-RW2400
– Re-certified Dell PC with PLOTBASE preinstalled – # RFBPC-RW3600
– Re-certified Dell PC with PLOTBASE preinstalled – # RFBPC-RW480– *Backup hard drive for quick restore to original condition – # RFBPC-BUHDD*
*NEW FEATURE – Add a 2nd, backup hard drive* with full PLOTBASE and Windows Operating System with all drivers pre-installed to the recertified PC. It’s a low cost, quick and easy way for recovery to original installation condition in case of hdd crash, virus or return to initial default install settings.
RATIO US, LLC.
Fredericksburg, TX
ph: 262-558-4900